manualshive.com logo in svg

Beisler 1280-7, Руководство по эксплуатации, Страница: 59 / 214

Поделиться
Скачать
Beisler 1280-7 Скачать руководство пользователя страница 59

Operation

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

57

4.17 Mouse station with guide rail and retrieval device (1281)

Fig. 50: Mouse station with guide rail and retrieval device

Worktable (3) with mouse station (2) and retrieval device (4) for overlapped 
working. The flexibly adjustable guide rail (1) can be adapted quickly to differ-
ent seam contours. The mouse station (2) is used to fix the seam ends, e.g. 
of the trousers hem, in place in order to guide the sewing material during the 
sewing process. It moves along the guide rail (1) from the end stop - rear (5) 
to the end stop - front (6). The retrieval device (4) automatically pulls the 
mouse station (2) back to the start position at the end stop - rear (5).

WARNING

Risk of injury from sharp and moving parts!

Puncture or crushing possible.

Do not reach into the open mouse.

(1) - Guide rail
(2) - Mouse station
(3) - Worktable

(4) - Retrievable device
(5) - End stop - rear
(6) - End stop - front

①

②

③

④

⑤

⑥

Содержание 1280-7























































































































































































































Отзывы:

Нет отзывов