Beisler 1280-7 Скачать руководство пользователя страница 171

Страница: 171 / 214

Programming Commander Pro

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

169

Fig. 131:

Performing a software update (1)

5. Press

Settings

(1).

6. This opens the Settings user interface.
7. Open the menu

Settings

(1) and press the

Software Update

option.



A window listing the files (2) stored on the USB key opens.

Fig. 132:

Performing a software update (2)

8. Select the file (2) containing the software update.



Another window opens.

9. To start the software update, press on the

Start Update

button.

10. Wait until advised that the USB key can be removed/that the control

panel was restarted.

11. Once the control panel has been restarted, the machine can be used

again.

12. The USB key can now be removed.

(1) - Settings

(2) - File

①

②

Содержание 1280-7























































































































































































































Результаты поиска

Содержание 1280-7

Отзывы:

Beisler 1280-7, Руководство по эксплуатации, Страница: 171 / 214

Результаты поиска

Содержание 1280-7

Отзывы: