Beisler 1280-7 Скачать руководство пользователя страница 120

Страница: 120 / 214

Programming Commander Pro

118

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

Fig. 97: Program templates

Tab for selecting the templates for Side seam closing (3), Inseam closing (2),
and Straight seams (1).

Copy settings from a template of different program to the active program.

2. Press the desired template (1), (2) or (3).



A list with variants opens.

3. Activate the desired variant with a press of the

symbol.

4. Press



A warning notices appears reading

All the parameters &

names of the program would be changed to template
default and cannot be recalled!

5. Press

Cancel

Change Template



Cancel

: The display returns to the previous user interface.



Change Template:

The user

is prompted to confirm to proceed.

(1) - Straight seams
(2) - Inseam closing

(3) - Side seam closing

②

①

③

Содержание 1280-7























































































































































































































Результаты поиска

Содержание 1280-7

Отзывы:

Beisler 1280-7, Руководство по эксплуатации, Страница: 120 / 214

Результаты поиска

Содержание 1280-7

Отзывы: