Beisler 1280-7 Скачать руководство пользователя страница 13

Страница: 13 / 214

Safety

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

Examples

Examples of the layout of warnings in the text:



This is what a warning looks like for a hazard that will result in serious
injury or even death if ignored.



This is what a warning looks like for a hazard that could result in
serious or even fatal injury if ignored.



This is what a warning looks like for a hazard that could result in
moderate or minor injury if the warning is ignored.

Puncture

Crushing

Environmental damage

Icon

Type of danger

DANGER

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the danger.

WARNING

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the danger.

CAUTION

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the danger.

Содержание 1280-7























































































































































































































Результаты поиска

Содержание 1280-7

Отзывы:

Beisler 1280-7, Руководство по эксплуатации, Страница: 13 / 214

Результаты поиска

Содержание 1280-7

Отзывы: