Beisler 1280-7 Скачать руководство пользователя страница 161

Страница: 161 / 214

Programming Commander Pro

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

159

Fig. 116: Configuration of the quick access icons (2)

All active parameters are contained as tiles (6) in the bottom bar (4).

To configure the tile for quick access:

1. Swipe right/left in the bar (4) to select the desired tile (6).
2. Press and hold the tile (6) in the bar (4).



The tile (6) detaches from the bar (4).

3. Use drag & drop (5) to move the tile (6) out of the bar (4) and into

the grid (3) at the desired position.

4. Or vice versa: Use drag & drop (5) to move the tile (6) from the grid (3)

into the bar (4).

5. Keep repeating the process until all tiles have been moved to the

desired position.

6. Press on the symbol

7. The settings are adopted, and the display returns to

Sequence

Programming

5.17 Using manual data transfer

Use this submenu to transfer data between the machine – or, more precise-
ly, the control panel – and a USB key. Various options are available for the
data transfer.

• Exporting data
• Importing data

(3) - Grid of the main screen
(4) - Bar (of possible tiles)

(5) - Drag and drop (Drag & Drop function)
(6) - Tile

④

⑤

⑥

③

Содержание 1280-7























































































































































































































Результаты поиска

Содержание 1280-7

Отзывы:

Beisler 1280-7, Руководство по эксплуатации, Страница: 161 / 214

Результаты поиска

Содержание 1280-7

Отзывы: