Beisler 1280-7 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 214

Beisler 1280-7 Скачать руководство пользователя страница 10

About these instructions

8

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

1.4 Liability

All information and notes in these instructions have been compiled in
accordance with the latest technology and the applicable standards and
regulations.

Dürkopp Adler cannot be held liable for any damage resulting from:

• Breakage and transport damages
• Failure to observe these instructions
• Improper use
• Unauthorized modifications to the machine
• Use of untrained personnel
• Use of unapproved parts

Transport

Dürkopp Adler cannot be held liable for breakage and transport damages.
Inspect the delivery immediately upon receiving it. Report any damage
to the last transport manager. This also applies if the packaging is not
damaged.

Leave machines, equipment and packaging material in the condition in
which they were found when the damage was discovered. This will ensure
any claims against the transport company.

Report all other complaints to Dürkopp Adler immediately after receiving
the product.

«
...
8
9
10
11
12
...
»

Содержание 1280-7























































































































































































































Отзывы:

Нет отзывов