Beisler 1280-7 Скачать руководство пользователя страница 157

Страница: 157 / 214

Programming Commander Pro

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

155

To remove a program from a sequence:

1. Select the program (1) you wish to remove in the sequence list.



The program (1) is activated.

Fig. 113: Removing a program from the sequence

2. Briefly press the symbol (2)



The program (1) is deleted from the current sequence without
warning.

To remove all programs from a sequence:

1. Perform a long press on the symbol (2)



A warning reading

Confirm “Remove All”

appears!

A sequence should contain at least one program.
Click “Remove All” to remove all programs and add
new ones or click “Cancel” to go back.

2. Press

Cancel/Remove All



Cancel

: the user returns to the user interface

Sequence

Programming.



Remove All:

Warning notice

Removed last program

appears.

3. Press

Add new program



The grid view for programs opens.

4. Select the program you wish to add (



p. 152

5. Press



The program is adopted, and the display switches back.

(1) - Program

(2) - Icon
(3) - Icon

②

③

①

Содержание 1280-7























































































































































































































Результаты поиска

Содержание 1280-7

Отзывы:

Beisler 1280-7, Руководство по эксплуатации, Страница: 157 / 214

Результаты поиска

Содержание 1280-7

Отзывы: