Beisler 1280-7, Руководство по эксплуатации, Страница: 151 / 214

Programming Commander Pro
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023 149
• The
Sewing foot position
(8) can be set to UP/DOWN at the
seam end.
• The
Needle position
(9) can be set to UP/DOWN at the seam end.
To enter the seam length:
1. Set
Stop in seam
to ON (5).
 Only if
Stop in seam
is switched on can the settings on the user
interface Stop in seam be adjusted.
2. At sewing stop 1 (1), briefly press the numerical value for the
Seam
Length
per seam section (2).
 If the appearing field is blue, the function is enabled.
 If the appearing field is gray, the function is disabled.
3. Press and hold the active numerical value for the
Seam Length
per
seam section (2).
 The integrated keyboard opens.
4. Enter the desired
Seam Length
per seam section (2) in the active field.
5. Press
Ok
.
 The numerical value is stored, and the display returns to the previous
user interface.
6. Briefly press
Soft start seam length
(11).
 If the appearing field is blue, the function is enabled.
 If the appearing field is gray, the function is disabled.
7. Press and hold the active numerical value for the
Soft start seam
length
(11).
 The integrated keyboard opens.
8. Enter the desired
Soft start seam length
(11) within the spec-
ified value range.
9. Press
Ok
.
 The numerical value is stored, and the display returns to the previous
user interface.
10. Briefly press
Soft start speed
(10).
 The integrated keyboard opens.
11. Enter the desired
Soft start speed
(11) within the specified value
range.
12. Press
Ok
.
 The numerical value is stored, and the display switches back.
13. Set the
Sewing foot position
(8) at seam end to UP(blue)/
DOWN(gray).
14. Set the
Needle position
(9) at seam end to UP(blue)/DOWN(gray).
15. Repeat steps 1-14 for each desired seam section 1-3 (1).
16. Press on the symbol .
 This opens the program parameters page.