1
3
A
B
C
3–11
ISScom – 3
Set Date/Time Command
The
Set Date/Time
command (Figure 3-15) allows
the system date and time to be set, or system clock
to be stopped. This dialog screen also displays an
LED mimic to identify when the Time Sync is in use
(preventing date/time from being changed by user).
The time field in the dialog box is not updated
continuously. The time at which the dialog box was
opened is the time that is displayed and remains as
such. This is true whether the MBTS is synchronized
with the IRIGB signal or not.
There is a green Time Sync LED mimic in this dialog
box (the LED is displayed as different shading on a
monochrome monitor). When this LED is green, the
MBTS is synchronized with the IRIG-B signal and
the Time field is grayed out, indicating that this field
can’t be changed. But the Date field can be changed
(by editing and pressing
Save
).
When the LED is
not blue, the MBTS is not time-
synchronized and therefore, both the Date and Time
fields can be changed.
Path
: System/ Setup / Set Date/Time
Figure 3-15 Date/Time Dialog Screen
SET DATE AND TIME COMMAND BUTTONS
Start/Stop
This toggles between start/stop, the
Clock
MBTS clock. ‘Stop’ pauses, ‘Start’
resumes.
Save
Saves Time and Date settings to the
MBTS when applicable.
Cancel
Returns to the ISScom main window. Any
changes to the displayed information is
lost.
System/Monitor
The
Monitor
submenu provides the user with access
to the present status of the MBTS measured and
calculated values, other real-time parameters and
conditions. The
Monitor
submenu provides four
commands:
•
Primary Metering
•
Secondary Metering/Function/System
Status
•
Phasor Diagram
•
Sync Scope
Q
Q
Q
Q
Q
NOTE
: Displayed parameters in monitor/status
screens will vary depending on unit
configuration.
Содержание M-4272
