Bay Networks 4000 Скачать руководство пользователя страница 242

Страница: 242 / 642

5-38

118814-D Rev. 00

Nautica Configuration Wizard Reference Guide

Parameter:

Type

Default:

Any

Options:

Any, None, StacLZ, MPPC, WCP

Function:

If compression is to be negotiated on this path, the type
of compression used can be specified.

Instructions:

The values here are:

•

MPPC: Microsoft Point to Point compression.

•

StacLZ: Compression algorithm developed by Stac,
now known as Hi/Fn.

•

Any: Any of the above options (apart from WCP)
will be used.

•

WCP: WAN Compression Protocol as used by
BayRS Routers.

•

None: No compression will be used.

Parameter:

Checkmode

Default:

Extended

Options:

No Check, Sequence

Function:

This parameter is only available if StacLZ or Any is
selected as the compression

Type

Instructions:

The values allowed here are:

•

Sequenced: The unit will request packets to reset
histories.

•

Extended: A flag is set at the beginning of the
packet to reset histories. This extends the packet.

•

No Check: None of the above options is used.

Содержание 4000



































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 4000

Отзывы:

Бренды по названию

Популярные бренды

Bay Networks 4000, Справочное руководство

Результаты поиска

Содержание 4000

Отзывы:

Бренды по названию

Популярные бренды