baxter Colleague 3 CXE, Руководство оператора

Страница: 68 / 230

4
Preparing the Primary Infusion Container and Set
4-14
COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL 071960491
For infection control purposes, consider the set change interval
recommended by the United States Centers for Disease Control and
Prevention (CDC), the facility’s guidelines, and the instructions
provided with the administration set.
1.
Prepare the primary infusion container following the manufacturer’s
directions for use.
2.
Attach an appropriate Baxter administration set to the solution
container and gravity prime the administration set following the
directions for use.
Note: The optional Prime function may also be used (see “Using the
Optional Prime Function” on page 4-18).
3.
Ensure all air is expelled from the administration set.
4.
Close the regulating clamp on the administration set.
! WARNING !
The pump may not detect an upstream occlusion if one or more of the following
conditions exist:
•
All air removed from the source container
•
Incomplete insertion of the spike into the source container
•
Improper venting of a rigid (glass bottle) or semi-rigid (plastic)
container, including BURETROL sets
If using rigid non-vented containers, refer to the appropriate
administration set instructions to determine the correct venting
procedure.
•
The air vent above the burette chamber is not open
To help prevent upstream occlusions that may not be detected by the pump:
•
Do not use a source container that has had all air removed.
•
When using a BURETROL set, do not invert BURETROL and squeeze
fluid into the primary container, which may wet out the vent filter and
obstruct airflow.