baxter Colleague 3 CXE, Руководство оператора

Страница: 213 / 230

071960491 COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL
11-17
Quick Reference Guide
Unloading the Administration Set
Unloading the Administration Set
Automatic Unloading
1.
If the pump module is running, press the
STOP
key on the pump
module to stop it.
2.
Close the regulating clamp on the administration set.
3.
Press the
Open
key on the pump module. The mechanism closes the
keyed slide clamp and opens the tubing channel. When an arrow is
displayed on the pump module, the tubing channel is open.
4.
Grasp the administration set on both sides of the pump and remove it
from the tubing channel. The mechanism closes automatically 60
seconds after the administration set has been removed.
Using the Manual Tube Release (MTR)
Use Manual Tube Release only when the Tube Loading Mechanism is
NOT functioning, or if a channel failure occurs. The MTR feature is for
emergency use. Never use the MTR to load or unload the administration
set during normal operation.
Note: The pump will not turn on if the MTR is in the open position.
For triple channel pumps: If the MTR is used, the remaining pump
channels cannot be programmed until the MTR is reset.
! WARNING !
While the pump automatically closes the keyed slide clamp, always close the
regulating clamp on the administration set before loading or removing the
administration set from the pump.
CAUTION
When attempting to load or unload an administration set, do not insert tools or
other objects into the tubing channel.
Note: Do not cut the tubing to remove the administration set
from the channel. If the tubing is cut, remove the slide
clamp immediately.