baxter Colleague 3 CXE, Руководство оператора

Страница: 116 / 230

4
Changing Volume, Weight or Concentration During an Infusion
4-62
COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL 071960491
1.
Stop the infusion. Drug amount, diluent volume, concentration, and
patient weight cannot be changed while the infusion is running:
The
Dose
field is highlighted (Figure 4-89).
2. Use the
×Ø
keys to highlight the field to be change.
3. Enter the new value(s) using the numeric keypad. The pump
automatically recalculates the other parameters (Figure 4-90).
4.
Check the programmed values, then press the
Confirm Primary
soft
key.
5.
Press the
START
key to resume the infusion using the new values.
Figure 4-89 Dose Field Highlighted
For single channel pumps: For triple channel pumps:
press the
STOP
key. press the
STOP
key for the
desired channel.
Note:
Secondary
Infusions
If a secondary infusion is running (secondary icon is
displayed), the secondary
Rate
field is highlighted. To
change primary infusion parameters, stop the second-
ary infusion, then press the
Primary soft key. Primary
infusion programs cannot be altered while a secondary
infusion is running.
Note:
Changing
Concentration
If the Concentration field is changed, the pump forces
the Drug Amount and Diluent Volume to be entered. If
the Drug Amount or Diluent Volume fields are
changed, the pump recalculates the concentration.
Figure 4-90 New Values Entered,
Other Parameters Recalculated
Note:
Parameters
Outside Limits
If the entries result in a value outside the range of the
current PERSONALITY feature set, or outside the
pump’s capabilities,
High
or
Low
is displayed in the
field. Reprogram other parameters so that the value is
within the limits.
If a
Volume to be Infused
is entered that is greater
than the Diluent Volume,
High
is displayed in the
Vol-
ume to be infused
field. The Volume to be Infused
cannot exceed the diluent volume.