Baumer PosCon OXE7, Руководство по эксплуатации

Страница: 68 / 75

en_BA_PosCon_OXE7.docx 68/75 Baumer Electric AG
04.01.2021 15:33/adr V1.3 ANW_81125407 Frauenfeld, Switzerland
ATTENTION!
The use of a sensor with a broken front optic or loose or exposed lens can
lead to hazardous laser radiation.
7.3
Influence of ambient light
Ambient light from lamps, the sun, etc. in the view field of the sensor can lead to malfunctions or a reduction of
accuracy and should be avoided as much as possible.
7.4
Mechanical damage
In the event of a broken front optic, defective display, or loose or exposed laser lens, the sensor must be
disconnected from the power supply immediately. It must not be put into operation again until it has been
repaired by an authorized person. Non-compliance with these safety instructions may lead to the release of
hazardous laser beams.
7.5
Cleaning the sensors
The laser distance sensors do not require any maintenance, except that the front windows must be kept clean.
Dust and fingerprints can impair sensor function. It is normally sufficient to wipe the windows with a clean (!),
soft lens cleaning cloth. Alcohol or soapy water can be used in case of severe soiling.
The display and the keys must be kept free from dirt and moisture. Water and dirt on the keys can impair their
function.
7.6
Disposal
This sensor contains electronic components. Dispose of parts according to country-specific provisions.