Baumer PosCon OXE7 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 75

Baumer PosCon OXE7 Скачать руководство пользователя страница 6

en_BA_PosCon_OXE7.docx

6/75

Baumer Electric AG

04.01.2021 15:33/adr V1.3 ANW_81125407

Frauenfeld, Switzerland

2.2

Installation

Standard installation

In  standard  installation,  the  sensor  is  mounted  at  a
right angle to the reference surface or the object. The
sensor  is  not  taught  into  the  reference  surface  so
configuration is very easy and straightforward.
This installation method is recommended even if the
reference  surface  cannot  be  taught  in  for  some
reason or another.

Angled installation

In angled installation, the sensor can be mounted
at  an  angle  of  up  to  +/-  30°  in  relation  to  the
reference surface. This installation method is used
when  space  conditions  do  not  allow  any  other
installation  option  or  the  mounting  angle  is  not
known.

Align the sensor as accurately as possible at a right
angle to the reference surface (background) or to the
object  (if  there  is  no  reference  surface  in  the
measuring  field).  The  object  must  be  within  the
measuring  field,  i.e.  the  distance  from  the  sensor
must  be  between  the  start  of  the  measuring  range
Sdc  and  the  end  of  the  measuring  range  Sde.  The
reference  surface  can  lie  outside  of  the
measurement  field  or  can  be  non-existent,  this
situation is reffered to as ege-to-infinity.

The sensor may be mounted at an angle inclined
maximally 30° to the left or to the right of the
reference surface (background) or to the object (if
there is no reference surface in the measuring
field).
Reference surface (background) and object must
be within the measuring field.

2

NOTE

The "Edge L rise or Edge R rise" mode can be used as an aid to find the zero point.
Now an object is slowly pushed toward the presumed zero point. The zero point is
reached by the rising edge of the object when the value 0 mm is shown on the sensor
display and the yellow LED switches.

0 mm

Reference point

Measuring field
width right

Measuring field
width left

Right

Left

Blind region

Start of measuring
range Sdc

MEASURING

FIELD

0 mm

Reference

point

Right

Left

0 mm

MEASURING

FIELD

+/-30°

Reference surface

Measuring field
width left

Measuring field
width right

Blind region

End of measuring
range Sde

«
...
4
5
6
7
8
...
»

Содержание PosCon OXE7












































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды