Baumer PosCon OXE7, Руководство по эксплуатации

Страница: 56 / 75

en_BA_PosCon_OXE7.docx 56/75 Baumer Electric AG
04.01.2021 15:33/adr V1.3 ANW_81125407 Frauenfeld, Switzerland
6.4.2
Definition of flanks
The edges to be detected are defined as rising or falling flanks.
The position/selection of flanks is defined as first from the left or first from the right .
A
rising flank is

a flank which runs from far to near

a flank which runs from infinity (or nothing) to an object
A
falling flank is

a flank which runs from near to far

a flank which runs from an object to infinity (or nothing)
The point of the flank which is closer to the sensor is
always chosen as the measuring value. The border of
the measuring range is not an edge.
6.4.3
Definition of an edge
Edge
An edge is the transition of a stable level (1) inside or outside the measuring range to another stable level (2).
Measurement is always carried out at the level that is closer to the sensor. The detection of an edge is also
possible if only one of the levels is within the measuring range. This situation is called edge-to-infinity and can
occur, if the second level is too far away from the sensor front or if it is not present at all.
The average increase must be greater than ±1.5 mm at 0.5 mm.
Left
Right
Red arrows represent edges/flanks
This arrowhead points to
the measuring value
0.5 mm
>1.5 mm
0.5 mm