Baumer PosCon OXE7, Руководство по эксплуатации

Страница: 64 / 75

en_BA_PosCon_OXE7.docx 64/75 Baumer Electric AG
04.01.2021 15:33/adr V1.3 ANW_81125407 Frauenfeld, Switzerland
6.5.4
Switching output
The switching output can be adjusted as a point or a window and the switching points can be set, see Section
DIGITAL OUT.
The output is transmitted as a push-pull signal with active high or active low, depending on the setting.
6.5.5
Alarm
The alarm output cannot be adjusted and is triggered by the following situations:

No object in the measuring field

No edge in the measuring field

Amplitude of the received signal is insufficient (e.g. in case of soiling)
It is output as a push-pull signal (active high).
6.5.6
Interface RS-485
No more than 16 sensors may be connected to one bus during operation with RS-485.
When the RS485 interface is activated, the analog output, the digital output, and the alarm output are
deactivated.
See separate RS 485 manual.