Baumer PosCon OXE7, Руководство по эксплуатации

Страница: 41 / 75

en_BA_PosCon_OXE7.docx 41/75 Baumer Electric AG
04.01.2021 15:33/adr V1.3 ANW_81125407 Frauenfeld, Switzerland
5.9.3
LIMIT L
Value measured horizontally from reference point (0 mm), to the left.
All edges to the left of this range are suppressed.
5.9.4
LIMIT R
Value measured horizontally from reference point (0 mm), to the right.
All edges to the right of this range are suppressed.
5.9.5
OFFSET
All edges below this line are suppressed.
In standard installation, the offset is measured, (when FLEX MOUNT is not activated) from the sensor
reference point (at a distance of 250 mm from the sensor).
If FLEX MOUNT is activated, the taught-in reference surface is zero.
FLEX MOUNT activated
If the FLEX MOUNT function is activated,
the sensor already knows the reference surface;
the desired offset value can be entered
directly.
Example
The offset should be 10 mm above the taught-in
reference surface.
Displayed value in the OFFSET menu: 0 mm.
 Entered OFFSET = 10 mm
10 mm
24
0
mm
10 mm; offset
Taught-in
reference surface
Reference surface
Reference
point
25
0
mm
Standard installation
In standard installation, the distance between the
reference point and the "end of measuring range
Sde" is always 250 mm. The distance from the
reference surface can be output with LIVE
MONITOR, which makes it easier to calculate the
offset.
Example
The offset should be 10 mm above the reference
surface.
Displayed value in LIVE MONITOR: 240 mm.
250 mm - 240 mm + 10 mm = 20 mm
 Entered OFFSET = 20 mm
10 mm