Barudan BEVT Series, Инструкция по эксплуатации

Страница: 54 / 193

7) Press the B-Key to choose a Code. *2
Press the D-Key to choose the data transmission speed. *3
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
8) Check that the device receiving the data is ready.
9) Press the E-Key to start saving to the PC (COM). *4
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
*1 The controller automatically selects an empty Memory location.
Delete a design and create an empty location if the memory is full.
*2 The B-Key toggles the Tape Code as U
Æ
F
Æ
EL. Other codes are not valid.
*3 the data transmission speed is chosen from the chart below.
The D-Key toggles the No. assigned to the speed.
No, Speed (bps)
０ ９６００ ×１
１ １４４００ ×１．５
２ １９２００ ×２
３ ２８８００ ×３
４ ３８４００ ×４
５ ５７６００ ×６
６ ７６８００ ×８
７ １１５２００ ×１２
*4 Cancelling the operation operation may take 10 seconds before it actually is
canceled.
5. Adding Stitches
The machine must be out of Drive mode in order to add stitches.
5-1. Adding Walk Stitches using the Jog Keys
Walk stitches can be added with the Jog Keys. The Pantograph actually moves
as the Jog Keys are operated.
1) Press the Menu Key to display “Menu 2” as below.
5－9