Barudan BEVT Series, Инструкция по эксплуатации

Страница: 113 / 193

2．All Function Codes
It is also possible to change all function codes in a design with the Teach function.
The machine must be out of Drive mode.
Refer to the “Function Codes” for the descriptions of the Codes.
1) Press the Menu Key to display “MENU 2” as below.
2) Press and hold the C-Key
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
3) The Function Code Screen displays.
Press the E-Key to search the next Code.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
*The screen automatically closes if a function code is not found.
*It searches only consecutive jumps more that are more than the MC setting of
“Trim Jump. The machine automatically trims the thread when consecutive jumps
are found that exceed the number programmed in this parameter.
4) Press the A or B – Key to change the Function Code.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
10－3