Barudan BEVT Series, Инструкция по эксплуатации

Страница: 76 / 193

1. Switching Designs
Select a design from Memory.
The machine must be out of Drive mode.
1) Press the Menu Key to display “Menu 2” as below.
2) Press the B-Key.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
3) The screen shows the list of designs in the memory and displays,
memory location, design name, and stitch count.
When a location is empty it is shown with “---”.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
4) Use the jog keys to select a design.
Press the Origin Key to move the Pantograph to the Start Point of the design. *1
*1 Refer to “The Start Point” to place the pantograph where the design should start.
Cursor Up
Previous Page Following Page
Cursor Down
7－2