Barudan BEVT Series, Инструкция по эксплуатации

Страница: 147 / 193

Ｄ２０：
The end of the Automending.
Ｄ２１：
The Stop for the Stop Switch.
Ｄ２２：
The error of the Trimmer Motor.
Turn OFF the machine. Check and remove the bind.
Ｄ２３：
The Stop for the Appliqué.
Ｄ２５：
The Stop for a thread break.
Pulse Motor Driver Over Heat.
Ｄ２６：
Turn OFF the machine to cool down.
Check the Ventilation Fan and the Air Filter.
The Stop for the Temporary Repair Stop which is
Ｄ２７：
entered in the previous run. Turn ON the sewing
head for the pattern to be fixed.
No further Stitch Back/Automending due to the
Ｄ２８：
Color Change Code.
Trim the thread for further Stitch Back /
Automending.
Ｄ２９：
Servo Driver Error. Call technician.
Ｄ３０：
Wrong Dip Switch Setting on the Head/Duct Board.
Ｄ３１：
No Driver Box recognized. Check the connection.
Ｄ３２：
The Stop for Sub End Code.
A power interruption has occurred. Turn OFF and
Ｄ３３：
On the machine.
The stop due to the Light Curtain. (Option)
Ｄ３４：
Check the connection if cannot restart.
Ｄ３５：
Lubrication Error.
Check the Lubrication Device.
The stop for the Bobbin Counter.
Ｄ３６：
Trim the thread. Change all the bobbins and
restart the machine.
Ｄ３７：
Sequin Device Error.
14－5