Barudan BEVT Series, Инструкция по эксплуатации

Страница: 77 / 193

2. Design Information
Viewing design information.
The Design Information Screen has following contents.
Design No. : The memory location of the design.
Stitch Count : The stitch count of the design.
Pass : Distance between the start and end points, shown as horizontal and
vertical values, measured in tenths fo millimeters.
Size : Distance between the overall dimensions of the design measured in
tenths of millimeters.
P1 : Distance from the start point to the bottom left corner of
the design, measured in tenths of millimeters.
P2 : Distance between the start point and top right corner of the pattern
measured in tenths of millimeters.
Free St : Total number of stitches available in memory.
*The unit for the PASS, SIZE, P1 and P2 is 1/10mm.
* The screen shows “---“ for the blank slot except the Design No.
1) Press the Menu Key to display “Menu 2” as below.
2) Press the B-Key.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
3) Press the B-Key.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
4) The Design Information Screen displays.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
Press the B-Key for the previous screen.
*In the Stand-By mode, the Jog Keys toggle the Design Information Screen for
all designs in memory location.
7－3