Barudan BEVT Series, Инструкция по эксплуатации

Страница: 101 / 193

1. Start Point
Instructions for registering the designs Start Point. Each design in memory can
have its own start point.
1) Select a design from Memory. Using the Jog keys move the pantograph to the
location where the design should start sewing.
2) Press the Drive key to put the machine in Drive mode. The start point is
Registered for the design.
Refer to “Drive Mode” for the details.
*The design first to be sewn does not have the Start Point.
3) Press the Origin Key to move the Pantograph to the Start Point already registered.
*In the Stand-By mode, the Pantograph can move to the Start Point of the
selected By pressing the Origin Key.
*The Pantograph moves to the Absolute Origin (machine origin).
2. Drive Mode
Instruction for putting the machine in Drive mode.
The machine can start sewing only in the Drive mode.
1) Move the Pantograph to the Start Point with the Jog Keys,
Refer to the “Start Point”.
2) Press the Drive Key to put the machine in Drive mode.
3) Press the Start or Stop Switch to start/stop sewing.
4) Press and hold the Drive Key for 3 seconds to exit Drive mode.
*The machine beeps when the machine is out of Drive mode.
3. Speed
Instructions for changing the sewing speed. The sewing speed can be changed while the
machine is sewing.
1) Press the Menu Key to display “MENU 1” as below.
2) Press the A-Key.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
9－2