Barudan BEVT Series, Инструкция по эксплуатации

Страница: 16 / 193

1. LCD Display
Shows machine status, icons, design information
*Refer to “Contents on the display”
2. Icon key – the A, B, C, D, E-keys
The operation buttons assigned to functions displayed by icons.
3. Origin LED
When lit the pantograph is located at the origin.
Blinks when the Jog Keys are assigned to other functions.
4. Origin Key
Moves the pantograph to the origin.
When the pantograph is located at the origin, it moves the pantograph to the
previous position in stand-by state, the position of the last stitch in
Drive mode.
5. Jog Keys
Moves pantograph. Single stroke gives 0.1mm movement. Holding the button moves
The pantograph in a continuous movement and the speed gradually increases.
Used to move the cursor for selecting.
6. Page Key
Switches screen
*Refer to “Paging Screen”
7. Menu Key
Switches the Menu Icon Keys
*Refer to switching the Menu Icon Keys
8. Drive Key
Places the machine in Drive mode, ready to sew.
9. Start Key
The machine starts sewing.
10. Stop Key
The machine stops sewing.
11. Float LED
Lit when the pantograph is moving through a pattern without sewing.
12. Teach LED
Lit when locating/changing existing function codes in a pattern.
13. COM (Serial) Por
This is to connect with RS-232 Cable.
This can be exchanged to LAN Card or USB Port.
14. PS / 2 Port
The PS/2 port for optional barcode reader.
Using barcode can skip some operations.
15. USB Memory Slot
The USB Memory slot
Designs are loaded/saved onto the USB Memory. It also loads the system
Software for the automat.
3－3