Barudan BEVT Series, Инструкция по эксплуатации

Страница: 170 / 193

Tearaway
Tearaway is a non-woven material that provides some of
the stability of Softouch, but can be torn away like paper. It
is used with non-stretch fabrics. It is hooped in the same
manner as Softouch, but it is not strong enough for heavier
knits or stretchy materials. Tearaway gives body to thin
materials and is well suited for nylon jackets, blouses,
sheets, etc. It will help reduce puckering and pulling on
these fabrics.
Cutaway
Cutaway backings include a large assortment of fabrics:
heavy nonwovens to stiff, woven cotton buckram; crinoline
to supple, woven nylon polyester. A cutaway backing is a
fuller product and provides more support than tearaway
backing. Cutaway backings are generally more expensive
but are more popular with experienced operators.
No-Show Transparent backing used for light colored knit and stretch
fabrics.
Water Soluble Topping Water soluble plastic is used as a topping to prevent
stitching from getting lost in knit fabrics, keep terry cloth
loops down, and to allow greater clarification of intricate
details.
Using Water Soluble Topping
1. Place water soluble topping on top of the fabric and hoop both.
2. After the embroidery process is complete, tear away the water soluble topping.
3. Spritz very lightly with warm water to dissolve water soluble topping.
4. A soft bristle brush may be used to help remove remaining water soluble topping
particles. Pass the brush lightly over the top of embroidery to raise up the topping.
Embroidery should not be left damp or wet longer than a few minutes.
BE
V
T Series
Mechanical
Guide Machine Basics
1
- 2
0