Barudan BEVT Series, Инструкция по эксплуатации

Страница: 109 / 193

10. Stitch Back
Stitch Back repairs stitches using the Stop key
1) Stop the machine with the Stop key.
2) Press and hold the Stop-Key to start the Stitch Back.
The Pantograph goes back through the design.
3) Hold the Stop-Key, it will stitch back even if the Stop Key is released.
Press the Start-Key to stop the Stitch Back.
The Pantograph can go further back by holding the Stop Switch again.
4) Press the Start-Key to begin sewing and cover the stitches already sewn with the new
stitches.
11. Automending
Automending backs up the machine to repair missed stitches.
Press and hold the Automending Switch at the Tension Box while the machine stops.
The Pantograph back track the sewing and the stitch count will follow.
The Pantograph stops back tracking, when the Automending Switch is released.
The sewing head on the Automending has the red LED on the Tension Box lit.
The Start Switch starts the sewing at the point were the machine back up to.
1) Stop the machine with the Stop-Key.
2) Press and hold the Automending Switch at the Tension Box on the sewing head which
need to do the cover sewing. Release the Automend switch when the pantograph has
reached the desired position.
3) Press the Start-Key to start the sewing.
3) The MC settings work after the Automending.
#12 : Overlap – Overlap stitches after the Automending, Default : 4
#13 : Auto Start – The automatic start after the Automending, Default : Inactive
The Auto Start option makes the machine stop after Automending or not.
When it stops : The machine stops where the Automending ends and makes Stitch
Back automatically for the stitch count which the Overlap
parameter sets.
When it goes on : The machine would not stop at the end of the Automending and
All the heads starts sewing.
*Back track with the Automending and then hold the Stop-Key for the Stitch Back
when many stitches need Automending. The Stitch Back back tracks without holding
the Stop-Key after 30 stitches.
9－10