Barudan BEVT Series Скачать руководство пользователя страница 6

Страница: 6 / 193

1. Safey Instructions

Before using the machine make sure to read this manual thoroughly and follow all
instructions.

The icons in the manual show the importance of the contents.

Acknowledge the following descriptions beforehand.

Icons

Safety information abou

！

Warning

Protecting yourself.

Important information about
protecting the machine.

！

Warning

This machine is made for an industrial use.
This is an embroidery machine. Do not use for other applications.

Read the instruction manual thruoghly and acknowledge the operaion before using the

machine.

Only those that know how to operate the machine should run the machine. Do not let

other personel operate the machine.

Operate the machine only from the front. Do not load work to the machine from the

back side.

Keep hands and face away from needles, take-up lever, trimmer, shafts, pulley, belts,
gears,etc. Do not operate the machine without the protective covers for the shaft,

pulley,belt and gear in place.

Keep long, necklaces, and bracelets away from the machine while operating.

Only one person should operate the machin.

One operator can start the machine while another operator is working on the machine

accidentally.

Be sure nobody is working on the machine before starting it.
Close attention is necessary when the embroidery machine is used by or near children.

！

Caution

1－2

Содержание BEVT Series


































































































































































































Результаты поиска

Содержание BEVT Series

Отзывы:

Похожие инструкции для BEVT Series

Бренды по названию

Популярные бренды

Barudan BEVT Series, Инструкция по эксплуатации

Результаты поиска

Содержание BEVT Series

Отзывы:

Похожие инструкции для BEVT Series

Бренды по названию

Популярные бренды