Item
Function
Range
Default
The
thickness
of
the
fabric
measured in millimeters.
Thickness
0.0 – 9.9mm
0.0mm
The ratio of the bobbin thread
B. Thread Rate
0 – 100%
50%
against the top thread in
satin stitches.
Adjusting Value
The calibration ratio of
thread consumption.
100 – 200%
100%
8. Deleting a Design
Instructions on deleting a design from memory.
*The machine must be out of Drive mode to delete designs.
1) Press the Menu Key to display “Menu 2” as below.
2) Press the B-Key.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
3) Press the E-Key.
。
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
4) Press the A-Key.
。
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
7－9
Содержание BEVT Series
