6. Final Adjustment and Configuration
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
______________________________________________________________
6-39
6.6.13.2
Write Lamp Runtime
This command opens a sub menu where the runtimes of lamp top and lamp bottom can be changed. This
function is intended to be used together with the function
Lamp Top Serial Number
and Lamp Bottom Serial
number
. These two commands together allow exchanging lamps within a Display Wall and keep tracking of their
runtimes.
Figure 6-57
Service|Lamps|Write Lamp Runtime
6.6.13.3
Read Lamp Voltage
This new function allows the estimation of the burner voltage. Pressing this button will open a sub menu which
shows the voltage value after a few seconds measurement time. This measurement is based on some optical
properties which are measured and used for voltage determination.
Make sure to select the correct lamp driver! Otherwise the displayed values are invalid!
Figure 6-58
Service|Lamps|Read Lamp Voltage
