![background image](http://html1.mh-extra.com/html/barco/overview-cdg67-dl/overview-cdg67-dl_installation-manual_4192338046.webp)
5. Geometric adjustment
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
________________________________________________________________
5-3
5.2
The projection lens for SXGA+ systems
Figure 5-1
projection lens for SXGA+ systems
1
Scale for screen size adaptation
2
Focus adjustment
3
Zoom adjustment
4
2 fixation screws for focus lock
- the focus ring still shows some clearance after locking. This due to the mechanical design of the
lens. Anyway, the focus is fixed.
5
2 fixation screws for zoom lock
6
Fixation screws for screen size adaptation lock, filled with paint
As default, the lens is adjusted for 50" SXGA systems. In case of an 80" SXGA+ system, the
screws[6] have to be loosened: use a hexagon key size 1.5mm to remove the paint from the
screws, loosen the screws, and turn the lens until its adjusted to 80" (84") SXGA+ (red
scale), see picture below. Then tighten the screws again.