1
11
1. Introduction
Introduction
Introduction
Introduction
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
________________________________________________________________
1-4
If an extension cord is used with this product, make sure that the total of the ampere ratings on the products
plugged into the extension cord does not exceed the extension cord ampere rating.
Also make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.
A. Mains lead (AC Power cord) with CEE 7 plug:
The colors of the mains lead are colored in accordance with the following code:
Green-and-yellow:
Earth (safety earth)
Blue:
Neutral
Brown:
Line (live)
B. Power cord with ANSI 73.11 plug:
The wires of the power cord are colored in accordance with the following code:
Green/yellow:
Ground
White:
Neutral
Black:
Line (live)
1.2.4
Placement
Place the device in a well-ventilated area away from sources of ignition and out of direct sun light. Never expose
this product to rain or excessive moisture
Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable
operation of the product and to protect it from overheating, these openings must not be blocked or covered.
Exposing flammable or combustible materials into close proximity of this device could result in the spontaneous
ignition of that material, resulting in a fire. For this reason, it is absolutely necessary to leave an "exclusion zone"
around all external surfaces of the device whereby no flammable or combustible materials are present. The
exclusion zone must be not less than 10 cm (4").
•
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the
cord.
1.2.5
Operation
BARCO products are designed and manufactured to meet the most stringent safety regulations.
During operation, the equipment
radiates heat on its external surfaces and from ventilation ducts, which is
both normal and safe.
•
Do not cover the equipment with any material while the equipment is in operation.
•
Do not block the cooling fans or free air movement under and around the device.
•
Keep flammable and combustible materials away from the device at all time.
In the event of fire, use sand, CO2, or dry powder fire extinguishers; never use water on an
electrical fire.
