![background image](http://html1.mh-extra.com/html/barco/overview-cdg67-dl/overview-cdg67-dl_installation-manual_4192338065.webp)
6. Final Adjustment and Configuration
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
________________________________________________________________
6-5
Figure 6-6
Lamps menu, Lamp optimization
This procedure optimizes the coupling of the active lamp into the optical system of the
projector and is immediately triggered by selecting the command Lamp Optimization.
During this procedure, the display gets dark for about 30seconds.
•
Use the cursor keys to highlight
Lamp Optimization
•
Press
ENTER
to select.
If
Operation|Message Box
is enabled, the following message box is displayed:
Figure 6-7
Lamp optimization in progress
The procedure should be performed subsequently for both lamps.
All other steps to configure the system have to be done in the service menu.