5
Geometric adjustment
SXGA+ and XGA use different lenses!
5.1
Adjustment Overview
ADJ01
After setting up the system, optical adjustment
must be done. In the following chapter a
description of the adjustment principles is
given as well as some hints to carry out this
procedure.
Switch on main power by pressing ON (power
switch). Wait at least half a minute while the
fan is blowing. Switch on the lamp by pressing
START (lamp switch). The last 3 steps have to
be repeated for each module.
ADJ02
The sharpness of the image is adjusted by
turning the focus ring. The picture size can be
adjusted by turning the picture size ring. For
further adjustment procedures do first the
following steps: loosen lightly the lens securing
screws and turn the lock ring clockwise to
unlock the engines.
