Baker Hughes Druck DPI 610 IS, Инструкция по эксплуатации

Страница: 7 / 76

Copyright 2007 Baker Hughes Company.
English–DPI 610/615 IS Instruction Manual | v
Contents
1. Introduction 1
1.1 General 1
1.2 Description of Procedures 1
1.3 Using This Guide 2
1.4 Maximum Instrument Ratings 2
1.5 Operator Controls 3
1.6 Display 3
1.7 Hard Key Functions 4
1.8 Soft Keys 4
1.9 Cursor Keys 4
1.10 Electrical Connections 6
2. Getting Started 7
2.1 Fitting Batteries 7
2.2 Switching On 7
2.3 Change Pressure Units 8
2.4 Voltage and Current Measurements 8
2.5 Typical Calibration Set-up (Pressure to Voltage) 9
2.5.1 General Procedure 9
2.6 Zero Display Reading 9
3. Task Selection 11
3.1 Task Key 11
3.2 Using TASK Functions 11
3.3 Set Units 11
3.4 Cal Mode (DPI 615 versions only) 11
3.5 Basic Mode (Task BASIC) 12
4. Taking Measurements 13
4.1 Pressure Transmitter (P-I) Task 13
4.2 Voltage Output Pressure Transmitter (P-V) Task 13
4.3 Pressure Converter (Pressure to Pressure) Task 14
4.4 Current to Pressure Converter (I-P) Task 15
4.5 Pressure Switch Test (P-SWITCH) Task 16
4.6 Pressure to Display (P-DISPLAY) Task 17
4.7 Leak Test (LEAK TEST) Task 18
4.8 Transmitter Simulator (TX SIM) Task 19
4.9 Relief Valve Test (REL VALVE) Task 20
5. Advanced Task 21
5.1 General 21
5.2 Select Input 21
5.3 Ambient Temperature Measurement 21
5.4 Process Functions 21
5.4.1 Tare Process Function 22
5.4.2 Min/Max Process Function 23
5.4.3 Filter Process Function 23
5.4.4 Flow Process Function 24