6. Maintenance
The Ranger Pro device needs minimal maintenance. If a device fails, it may be due to a weak
battery, environmental damage, or even a blocked wireless connection.
6.1 Monitor Battery Levels
To monitor your Ranger Pro device’s battery status, use your network infrastructure software or
the NFC reader and the Ranger Pro software. Depending on the device operating mode and
configuration, the battery lasts up to five years.
Check the devices' battery status monthly. If a battery status is medium, be sure you have
replacement batteries in stock or on order. However, for optimal device life, we recommend that
you don't store batteries for more than 12 months. If a battery status is low, replace the battery
within a week or two.
Install only approved D-sized 3.6V lithium-thionyl chloride batteries. For details and ordering
information, see the
Ranger Pro Datasheet
(document 125M5237) available from
Battery Status Monitoring
Battery status is updated once per hour and may be trended. Battery status is affected by low
temperatures. A new battery displays 75%. 100% is only used for line powered devices. There are
three battery states:
l
75 to 100%: High
l
25-75%: Medium
l
0- 25%: Low
To view battery status:
l
Using the Yokogawa gateway:
a. Click the
Field Device List
button. The power supply status is displayed in the right
column.
l
Using the Honeywell gateway:
a. Select a device in the
Selection Panel
.
b. In the
Property Panel
, expand
Device Management
. The power supply status is
displayed at the top.
l
Using System 1:
a. Select
Display
>
Devices
.
b. In the
Device
hierarchy, select a Ranger Pro device. Expand the device and select
Health
.
c. In the
List
pane, the
Health
Point
Power Supply Status
Measurement value is
displayed.
43/56
Ranger Pro Wireless Condition Monitoring Device
User Guide
125M6113 Rev. D
