To modify gateways:
1. Open the Ranger Pro configuration application.
2. Select
Network Manager
>
Gateways
. Existing gateways are displayed.
o
To modify a gateway:
a. Select the gateway and click
Modify
. The
Modify Gateway
dialog box is
displayed.
b. Modify the
Site Name
or
Gateway Name.
c. Click
Modify Gateway
.
o
To remove a gateway:
a. Select the gateway and click
Remove
. The
Remove Gateway
dialog box is
displayed.
b. Click
Remove Gateway
.
o
To reset gateways:
a. Select an individual gateway and click
Reset
.
b. Click
Reset All
.
To view available devices on the gateway:
1. Open the Ranger Pro configuration application.
2. Select
Network Manager
>
Gateways
. Existing gateways are displayed.
3. In
Gateways
, select a gateway from the list.
4. Double-click on the gateway name. The
Sensors
pane displays all devices and their status.
If using System 1, to modify the gateway IP address, refer to the System 1 online help or user
guide.
Configure Sensors Over the Network
To configure sensors over the network:
1. Open the Ranger Pro configuration application.
2. Select
Network Manager
>
Sensors
tab. Current devices are displayed.
3. Select
Configuration Manager
>
Live Configuration
.
4. Select a sensor device. Verify that the sensor status in the application footer is
Ready
.
5. Modify configuration options as needed.
6. Unsaved changes are highlighted in blue. To save the changes, click
Apply
. Pending
changes are displayed in orange. Completed changes are displayed in black.
To save sensor configuration settings:
1. Open the Ranger Pro configuration application.
2. Select
Network Manager
>
Sensors
. Current devices are displayed.
3. Select
Configuration Manager
>
Preset Configuration
.
30/56
Ranger Pro Wireless Condition Monitoring Device
User Guide
125M6113 Rev. D
