Badger Meter FMS-3, Руководство пользователя

Страница: 23 / 60

Select
ADR NWK PWR STA
1 . Use the SCROLL key to move the cursor to ADR .
RADIO PREFIX
00:0D:6F:00
2 . Press SCROLL again to display the Radio Prefix screen .
RADIO ADDRESS
01:80:A5:63
3 . Press
ENTER
to display the Radio Address screen .
4 . Press
ENTER
to return to the selection screen .
Radio Network
The Radio Network default is zero . You need to change this setting only if you have multiple RF FMS systems . All
RF Meter/Hose Radio Network settings must match the Master Keypad and Dispense Keypad settings .
Select
ADR NWK PWR STA
1 . Use the
SCROLL
key to move the cursor to
NWK
.
2 . Press
ENTER
to display the Radio Network screen .
RADIO NETWORK
0--
3 . Press ENTER to return to the selection screen .
Radio Power
Select
ADR NWK PWR STA
1 . Use the
SCROLL
key to move the cursor to
PWR
.
2 . Press
ENTER
to display the Radio Power Level screen .
RADIO PWR LEVEL
20 dBm
3 . Press ENTER to return to the selection screen .
Radio Status
The Radio Status options are:
• NWK CONNECTED – The network is connected and operational .
• SERIAL ERROR – There is a radio communication error on the serial bus between the keypad and the radio .
• NWK DOWN – There is no network within the range of the Dispense Keypad .
• NWK LOST – The network connection is currently unavailable .
Select
ADR NWK PWR STA
1 . Use the
SCROLL
key to move the cursor to
STA
.
2 . Press
ENTER
to display the Radio Status screen .
RADIO STATUS
NWK CONNECTED
3 . Press ENTER to return to the selection screen .
Dispense Keypad
Page 23 December 2014 FMS-UM-01200-EN-01