Certification
• Contains FCC ID: S4GEM35XB
• Contains IC: 8735A-EM35XB
• FCC CERTIFIED, PART 15, SUB-PART C
• CE0681 EC-R&TTE Certified
This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation .
TO SATISFY FCC RF EXPOSURE REQUIREMENTS FOR MOBILE TRANSMITTING DEVICES, A SEPARATION DISTANCE OF 20
CM OR MORE SHOULD BE MAINTAINED BETWEEN THE ANTENNA OF THIS DEVICE AND PERSONS DURING OPERATION.
TO ENSURE COMPLIANCE, OPERATIONS AT CLOSER DISTANCES THAN THIS ARE NOT RECOMMENDED.
WALL-MOUNTING THE KEYPAD
The keypad should be mounted upright with the antenna pointing upward, near a 120V AC electrical socket, to a structurally
sound wall through the two holes on the top of the keypad casing . Height on the wall should be at eye level . Care should be
taken to avoid mounting behind any steel objects (tool storage cabinets and metal chain linked fences) that may block the RF
communication signal . Care should also be taken to avoid direct, significant heat sources .
7-5/8”
3-3/16”
7-3/8”
Figure 3: Mounting Dimensions for Keypad
Wall-Mounting The Keypad
Page 8
December 2014
FMS-UM-01200-EN-01
