Azbil MagneW Two-wire PLUS+ MTG15A, Руководство пользователя

Страница: 151 / 280

6-7
Key names and functions
This section describes the functions assigned to the orange keys, which are mainly used to
communicate with the converter or to select a screen or to select from the menu.
Key
Description
Press key Press SHIFT + key
G
SET
SET: Used for setting correction coefficient in
LRV setting.
No effect
H
NEXT
NEXT: Scrolls up the screen in the CONFIG
function.
No effect
L
PREV
PREV: Scrolls down the screen in the CONFIG
function.
No effect
OUT- J
PUT
INPUT
OUTPUT: Displays a value in percentage,
which is transmitted by the converter to the
control loop.
INPUT: Displays an
instantaneous flow rate
value detected by the
converter in a real flow rate.
COR- K
RECT
RESET
CORRECT: Press this key to adjust the zero
point of the converter. This operation is
available while INPUT (input) is being read.
RESET: Resets the internal
data of the converter to the
factory setting.
ENTER
( Yes )
NON-VOL
ENTER: Press this key to answer “Yes” to a
question on the screen. The screen will move
one step up or down or data set by the SFC is
written into the database of the converter.
NON-VOL: The data set by
the SFC is forcibly written
into non-volatile memory of
the converter.