Azbil MagneW Two-wire PLUS+ MTG15A, Руководство пользователя

Страница: 245 / 280

7-19
Pulse width
To set the pulse width value, proceed as follows:
1. From online menu,
Select:
1. Device setup

4. Detailed setup

2. Conf output

2. Pulse output

3. Pulse width
Fig. 7-32. will then be displayed.
OK EXIT ENTER ESC ABORT DEL SAVE HOME HELP
MAGNEW2W: ** ******
Total restart val
0
0
Fig. 7-32.
2. Duty ratio is set 50%. If setting the value arbitrarily, select YES, and press F4 (ENTER). If
duty ratio of 50% is fine, select NO.
3. Use the numeric keys to enter a pulse
width in the value input display.
Setting range of pulse width is duty ratio
of 70% or less.
OK EXIT ENTER ESC ABORT DEL SAVE HOME HELP
MAGNEW2W: ** ******
Totalizer will be
reset
1 Yes
2 No
Fig. 7-33.
4. Once a new value is entered, press F4 (ENTER). Data will be transmitted.
When the value is outside the range, error will be displayed. Input the value again.