Azbil MagneW Two-wire PLUS+ MTG15A, Руководство пользователя

Страница: 109 / 280

5-39
5-6-2. Selecting Pulse Output, Electrode Status Output or High Low Status
Output
Pulse output, electrode status output or high low status output are selectable. They are open
collector outputs.
When pulse output has been selected:
Set pulse scale, pulse width, drop out, and failsafe mode for the pulse output.
When high low status output has been selected:
As a contact output, self diagnostic output (critical failure) or upper/lower limit
alarm is output.
Select % flow rate value for upper/lower alarm or output status (OPEN or CLOSE in
normal condition).
When electrode status output has been selected:
As a contact output, empty status output or scale on electrode status alarm is
output.
Select output status (OPEN or CLOSE in normal condition).
Setting range: PULSE: Selection of pulse output
HI LO STOUT: Selection of contact output for upper/lower limit alarm or critical
failure status ELECTRODE STOUT: Selection of contact output for empty status or
scale on electrode diagnostic
Default: PULSE
Select pulse output, electrode status output or high low status output in accordance with the
following procedure.
Step Procedure Screen
1 Enter ENGINEERING MODE (see “5-5-10. Entering
ENGINEERING MODE and MAINTENANCE
MODE” on page 5-33). Then press the

or

key to
display the screen at right.
20.0 %
_# FUNC SET
PULSE
2 Press the

key to move the cursor to the position for
set function.
Press the

or

key to display a function to be set.
Select PULSE (pulse output), HI LO STOUT (contact
output for upper/lower limit alarm or critical failure
status) or ELECTRODE STOUT (contact output for
empty status or scale on electrode diagnostic).
20.0 %
_# FUNC SET
_PULSE
20.0 %
# FUNC SET
_ HI LO STOUT
20.0 %
# FUNC SET
_ELECTRODE STOUT
3 Press the MODE key to return to the MEASURING
MODE and to save the data.
20.0 %
_# FUNC SET
PULSE
CAUTION
You have only ten minutes to return to MEASURING MODE to save the new value before
the system resets it to the previously saved value.