Axis StorPoint HD, Руководство пользователя

Страница: 85 / 95

Appendix C: Updating the Software and Extending the Memory
AXIS StorPoint HD 84 User’s Manual
Updating the Axis
StorPoint HD Flash
Memory
You can carry out an update to your Flash Memory over the network
using FTP on a TCP/IP network.
To upgrade over the network you will need the following:
• The file with the new StorPoint HD software. The name of this
file is of the form
product.version , e.g. HDE_100.BIN for the
software release 1.00 for the Ethernet version of the
AXIS StorPoint HD. Retrieve the updated file from the Axis Web
site or your local distributor.
• A computer on the network with TCP/IP and FTP.
• The StorPoint HD must also be installed on the network with
TCP/IP as described “Section 3 -
Network Configuration ”.
Follow the steps below to upgrade the print server software:
1. Log in to the Axis StorPoint HD with the command
ftp <host
name>
where
<host name>
is the name assigned in your system
host table.
2. You will be prompted for user id and password. Use the user id
root
,
which has the default password
pass
(
root
is the user id with the
highest priority).
3. Issue the command
bin
to change to binary transfer mode.
4. Issue the command
put <software name> flash
where
<software name>
is the name of the new StorPoint HD software,
e.g.
HDE_100.BIN.
5. Wait for the Flash load to finish. This normally takes 1 to 4 minutes.
The unit will then automatically restart with the new StorPoint HD
software.
Caution
0
❏
Be careful not to interrupt the file transfer. If the transfer is
interrupted the StorPoint HD may have to be re-initialized by
your dealer.
6. Log out using the command
quit
,
bye
or
exit
depending on your
FTP version.
Instructions on how to carry out the update are also supplied with the
software update.