Axis StorPoint HD, Руководство пользователя

Страница: 24 / 95

Section 3: Network Configuration
AXIS StorPoint HD 23 User’s Manual
Set the Internet
Address Using the arp
Method in Windows
In both Windows 95 and Windows NT the Internet address can be
downloaded using the
arp method. Perform the following commands
from the DOS prompt to download the Internet address and verify
the communication.The
Ethernet address or node address equals the
serial number found on the underside label of the AXIS StorPoint HD
with each pair of digits separated by a hyphen, see example below:
Example:
The host will return ‘Reply from
192.36.253.80...
’ or similar
indicating that the address has been set and that communication is
established.
Notes:
❏
When you execute the ping command for the first time you
should expect a response time significantly longer than usual.
❏
Once the StorPoint HD has established communications using an
appropriate Internet address the arp/ping commands can not be
used to change the address. The reason is to avoid accidental or
unauthorized change of the Internet address.
To make the StorPoint HD accept setting of the Internet address
using the arp method, simply restart it.
arp -s <Internet address> <Ethernet or node
address>
ping <Internet address>
arp -s 192.36.253.80 00-40-8c-11-00-86
ping 192.36.253.80