Avocent AMWorks, Инструкция по установке и эксплуатации

Страница: 51 / 113

43
C H A P T E R
7
Managing Servers and
Server Groups
The AMWorks software enables you to manage servers and server groups as listed below. For an
introduction to user and server groups, see
User groups and server groups on page 93.
By using AMWorks software to manage servers and server groups, you can:
• Display information about servers (see Editing and Viewing Servers on page 46)
• Display and change a server’s configuration information (see Editing and Viewing Servers on
page 46)
• Display and change configuration information for an MDM-capable device (see Editing and
Viewing MDM-Capable Devices on page 53)
• Set audio and serial for servers (see Setting Audio and Serial for Servers on page 28)
• Set global audio and serial for users and servers (see Setting Global Audio and Serial for Users
and Servers on page 28)
• Add and remove server groups (see Adding and Removing Server Groups on page 43)
• Display and change server group configuration information (see Editing and Viewing Server
Groups on page 47)
• Display server memberships in server groups (see Editing and Viewing Server Groups on
page 47)
• Remove server groups (see Adding and Removing Server Groups on page 43)
Adding and Removing Server Groups
Follow the instructions below to add or remove server groups in the AMX switching system. For
more information, see
User groups and server groups on page 93 for more information.
NOTE: If you create server groups in your system, you must use the AMWorks software for all subsequent user
access rights changes on the system. If you make any subsequent changes from an AMX user station OSCAR
interface, the system will go out of sync. See
Synchronization status indicator turns red on page 98 for
more information.