Avocent AMWorks, Инструкция по установке и эксплуатации

Страница: 26 / 113

18 AMWorks Software Installer/User Guide
To name a router's levels and ports:
1. From the Resource Routers tab on the AMWorks software main menu, click NVISION -
Configure . The Resource Router Configuration dialog box displays.
2. Click the Naming tab on the Resource Router Configuration dialog box.
3. From the Device drop-down list, select the switching router you wish to configure.
4. From the Level drop-down list, select the level you wish to name.
NOTE: The input and output tables will display the input and output port numbers for the level you selected.
5. (Optional) In the Level Name field, type a descriptive name to associate with the Level entry
you selected. This name can be from 1-8 characters.
NOTE: The Level Name field will display a name if one has been defined or the ASCII character for its number if
a name has not been defined. Leading and trailing spaces will be deleted when Save Names or OK is selected.
6. (Optional) In the Name fields of each table, type descriptive names for the input and the output
ports for each port number. The port numbers will be displayed in the Input and
Output columns.
NOTE: The Name fields in the tables will display names if they have been entered or ASCII characters for the
numbers if names have not been defined. Leading and trailing spaces will be deleted when Save Names or OK
is selected.
7. Click the Save Names button to save the association between the level and the level name,
ports and port names.
8. Repeat steps 4-7 to name additional levels and ports in the selected router.
9. (Optional) If you wish to name levels and ports for an additional router, complete steps 3-7.
10. After naming the levels and ports for the selected router(s), click OK to save changes and exit
the Resource Router Configuration dialog box.
- or -
Click the Define CRG tab to begin defining resource groups. For more information, see
Defining TRGs on page 18, Defining CRGs on page 20 and Defining DRGs on page 21.
Defining TRGs
After you have added a switching router and named the levels and ports available in the router,
define a Target Resource Group (TRG) for a particular server. The TRG you define will associate a
router, an input or output port designation and an input port definition with the selected server for
each index in the group. When this server is connected to a user station, the AMWorks software
maps, by index number, the TRG with the corresponding Console Resource Group (CRG),
enabling the switching of the proper input ports to output ports. After defining the TRG for a
selected server, define a CRG and, optionally, a Default Resource Group (DRG) for AMX
switching system user stations.
The AMX switching system also enables you to define TRGs that group each of the following: