Avocent AMWorks, Инструкция по установке и эксплуатации

Страница: 44 / 113

36 AMWorks Software Installer/User Guide
To display and change the system administrator's configuration information:
1. Select Users - Edit/View Users from the menu bar.
- or -
Type
Ctrl+U
.
- or -
Click the Edit/View User icon in the toolbar.
2. Select admin from the list. Click OK . The Edit/View Administrator window displays.
3. You may change the system administrator's username and password. The User Settings tab also
enables you to configure hot keys, target flag position, and scan dwell time and audio and
serial settings for the system administrator. Refer to
Setting Audio and Serial for Users on
page 27 and Setting Hotkeys, Target Flag and Scan Dwell Time on page 36 for more
information.
4. Click OK to save revised administrator information.
- or -
Click Cancel to exit the dialog box without saving the changes.
Setting Hotkeys, Target Flag and Scan Dwell Time
Follow the procedures below to assign hotkeys to system servers, place the Target Flag on user
screens and set the time the server channel will remain on the screen while it is in Scan mode. You
can define up to 12 hotkey sequences for each AMX switching system user.
To set hotkeys:
1. Select Users - Edit/View User from the menu bar.
- or -
Type
Ctrl+U
.
- or -
Click the Edit/View User icon in the toolbar.
2. Type a username or select a name from the list. Click OK . The user's configuration information
is displayed.
3. Click the User Settings tab. The HotKeys settings display. The defined keys table displays
existing hotkey sequences and associated server information for the selected user.
4. Select the hotkey sequence from the Assigned Key drop-down list that you wish to assign to a
specific server.
5. Select the server name from the Assigned Server drop-down list. The Assigned Server Details
displays information corresponding to the selected server, including the name and the IUD
switch to which the server is connected.
6. Click the Define button to display the assigned hotkey sequences in the defined keys table.