6.1 Basic operation
43
XM and XT Operator Instructions
6
6.1.3 Setting the scale to pre-pack
Pre-pack mode enables a number of consecutive labels to be printed
for each selected item. For this reason, the selected item – along with
any tare details – are retained until cleared. In general, an item is
selected in the usual way and the details are automatically ‘fixed’ – with
a label being printed each time the weight changes and then returns to
a steady weight again.
If your scale has been configured to allow direct entry to Pre-pack
mode, you can press the FIX
key.
PLUs and tares are retained in pre-pack mode until cancelled.
1. Touch
on the home screen.
2. Touch
on the display screen.
3. Select
.
Pre-pack PLU lock
If you cannot select a different PLU from the one displayed on the
scale, then the pre-pack PLU lock is enabled. You must press
to be able to select a different PLU.
If the lock is disabled for your scale, you will be able to select a different
PLU from the one displayed by pressing a dedicated PLU key or by
entering the PLU number. This will override the currently displayed
PLU.
Weight only labels
Select a PLU with a zero unit price and follow the steps in
Weighed
goods
on page 42
. A weight-only label is printed with no unit or total
price or associated symbols.
