68
Antiscanner
By this function, the antiscanner function, that is the presence of radio disturbances on both channels, can be set.
When this function is enabled and in the presence of radio disturbances, the related technical message is sent to
all the associated numbers. By default it is disabled, to change it proceed as follows:
Select menu SETTINGS followed by ;
Select ANTISCANNER followed by ;
Follow the instructions displayed on the display
Supervision
By this function the supervision function can be set, that is the non-periodical transmission by the radio control
panel stored, if any. When this function is enabled and in the presence of a non periodical transmission, the related
technical message is sent to all the associated numbers. By default it is disabled, to change it proceed as follows:
Select menu SETTINGS followed by ;
Select SUPERVISION followed by ;
Follow the instructions displayed on the display
Exit time
By this function the exit time from 0 to 99 seconds, can be set; by default this time is 60 seconds, to change it
proceed as follows:
Select menu SETTINGS followed by ;
Select SET ENTRY DELAY followed by ;
Follow the instructions displayed on the display
System reset
By this function all programmings carried out can be reset.
Proceed as follows:
Select menu SETTINGS followed by ;
Select SYSTEM RESET followed by ;
Follow the instructions displayed on the display
