MAIN MENU SETUP GUIDE
User Manual
47
Step 2:
In the Advance interface, click preset “Setting” button, a dialog box will pop-up
shown as Fig 4-39:
Fig 4-39 Advance-Preset Setting
a.
In the preset set interface, click Setting button, a dialog will pop-up
shown as Fig 4-40:
Fig 4-40 Preset Set-Setting
b. User can control the dome rotating up, up left, down, right down, left , left
down, right and up right and stop rotating; adjust the rotate speed and
the value of zoom, focus and iris of the dome;
c.
select the serial number of the preset point. Click
button to enable
the PTZ wiper and click
button to enable the PTZ light.
Note: PTZ must support wiper and light, these two functional
buttons can take effect. At the same time these two buttons are
just available when selecting PELCOP or PELCOD.
d. Select the serial number of the preset point. Click Save button to save
the settings, click
icon to hide the tool bar, right-key can display it;
click
icon to exit the current interface.
e. In the preset interface, click OK button to save the setting; click Exit
button to exit current interface.
Step 3:
In the Advance interface, click cruise “Setting” button, a dialog box will pop-up
shown as Fig 4-41:
